Dreambox 500s Plus

- 250 MHz PowerPC Processor (350 Mips

- Linux Operating System- 1 x Smartcard-Reader- MPEG2 Hardware decoding- available tuner DM500+: DVB-S- V.24/RS232 Interface- 10/100Mbit compatible Ethernet Interface- 2 LED status- unlimited channel lists for TV/Radio- channel-change time < 1 second- full automatic service scan- supports directly bouquet-lists- supports EPG (electronic program guide)- supports own videotext- supports multiple LNB-Switching control (DiSEqC)- fully adaptable OSD in many languages and skin-support- S/PDIF Interface for digital bit stream out (AC-3)- 1 x Scart-interfaces

only DM500+ :- 32 MByte Flash- 96 MByte RAM

DM500 + technical data
DBS-Tuner:Frequency Range 950 …. 2150 MHzSignal Level - 65 dBm …. - 25 dBmSignal-to-Noise Level 12 dB max.DBS-Tuner Input Connector F-Type femaleInput Impedance 75 OhmAFC +/- 3 MHzDemodulation Shaped QPSKFEC Viterbi and Reed-SolomonViterbirate 1/2, 2/3, 3/4, 5/6, 7/8Roll-off Factor 35 %Demultiplexing according ISO 13818-1
Video decoder:Video Compression MPEG-2 and MPEG-1 compatibleVideo Standard PAL G/ 25 HzVideo Formats 4:3 / 16:9Letterbox for 4:3 TV-Device
Audio decoder:Audiokompression MPEG-1 & MPEG-2 Layer I and IIAudio Mode Dual (main/sub), StereoFrequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:Output Level L/R 0,5 Vss on 600 OhmTHD > 60 dB (1 kHz)Crosstalk < -65 dB
Output digital:Output Level 0,5 Vss on 75 OhmSampled Data Filtering 32 kHz, 44.1 kHz, 48 kHzS/PDIF-Output optical (AC3)
Video parameterInput Level FBAS 1 Vss +/- 0.3 dB on 75 OhmTeletext filter in conformity with ETS 300 472 Standard
TV-Scart:Output: FBAS, RGB, S-Video
Serielle Interface RS 232:Typ RS232 bidirectionalBitrate 115,2 kBit/s max.Plug Connector SUB-D-9Function: Update of Firmware
Ethernet:10/100 MBit compatible interfaceFunction: Update of Firmware
LNB Power and polarisation:LNB Current 500mA max. ; short-circuit-protectedLNB Voltage vertical < 14V no load, > 11,5V at 400mALNB Voltage horizontal < 20V no load, > 17,3V at 400mALNB shut-off at Standby-Mode
Count of active satellite position:DiSEqC 1.0/1.2 SAT POSITION / SAT OPTIONDiSEqC - Rotor Control
Power consumption:10W / 12V
Input voltage:DC12V +/- 15%
Extern power supply:Input: 110-240V AC / 50-60Hz / 0,6AOutput: 12V = / 1A or 2A